Available versions:
Version on truck TS20
STANDARD EQUIPMENT
- 2 plates for stabilisers
- 1 galvanised toolbox
- Manually extendable rear underrun protection device
- Front storage compartment (*)
OPTIONS
- Weighing system
- Proportional radio control
- Hydraulic connection for chariot
- Pneumatic conveying system
- (compressor) for silo filling (*)
Versione su semirimorchio TS28
STANDARD EQUIPMENT
- 2 plates for stabilisers
- 1 galvanised toolbox
- Manually extendable rear underrun protection device
- Front toolbox (*)
OPTIONS
- Weighing system
- Proportional radio control
- Pneumatic conveying system
- (compressor) for silo filling (*)
Silo handling systems for the transport of bulk materials
Overmat silo handling systems are conceived to be the best solution in transporting bulk materials.
Two models are available: TS 20 on 3-4 axles truck and TS 28 on semi-trailer.
Both models are designed to optimise the transporting of silos containing bulk materials, providing a reliable and performing solution.
According to your needs, you can choose between central pocket and two side pockets versions.
On demand, TS 20 and TS 28 systems can also be equipped with a compressor for the pressure loading of material.
With these silo handling systems, Overmat offers quality and innovation that satisfy all jobsite logistics needs.
TS20 – Silo handling system on a 3/4 axles truck
OVERMAT TS20 is a system for the transport and handling of silos with a volume of up to 22 m³ (silo length up to 7000 mm).
Available versions:
- 3 and 4 axles vehicle
- Central pocket
- 2 side pockets
TS28 – Silo handling system on a semi-trailer
OVERMAT TS28 is a system on semi-trailer for the transport and handling of silos with volume up to about 24 m³ (silos length up to 8000 mm).
Available versions:
- Central pocket
- 2 side pockets
Photo Gallery
Technical table
| TECHNICAL CHARACTERISTICS | TS20 - Silo handling system on a 3/4 axles truck | TS28 - Silo handling system on a semi-trailer |
| Lifting capacity | 20 ton | 28 ton |
| Upperstructure weight | 5 ton | 11 tons (semi-trailer included) |
| Vehicle | 8x2 - 8x4 | Semi-trailer 3 axles |
| Length | Distance 1st - 3rd axles 4500 mm - 4600 mm | Total length 9000 mm |
| Drive | Vehicle PTO | tractor PTO or auxiliary engine |
| STRUCTURE AND HANDLING | TS20 - Silo handling system on a 3/4 axles truck | TS28 - Silo handling system on a semi-trailer |
| Structure | Press-bent profiles from high-strength steel sheets (Domex/Weldox) | Press-bent profiles from high-strength steel sheets (Domex/Weldox) |
| Lifting | 2 lateral cylinders | 2 lateral cylinders |
| Sliding system | 1 at the centre or 2 at the sides (*) | 1 at the centre or 2 at the sides (*) |
| OLEODYNAMIC SYSTEM | TS20 - Silo handling system on a 3/4 axles truck | TS28 - Silo handling system on a semi-trailer |
| Oil tank | 80 l | 80 l |
| Working pressure | 270 bar | 270 bar |
| Oil filters | Pressure and return filters | Pressure and return filters |
| Control devices | Proportional electro-hydraulic distributor | Proportional electro-hydraulic distributor |
| Hydraulic pump | Inclined axis piston pump | Inclined axis piston pump |
| Electrical System | 24 V DC | 24 V DC |
