TECHNICAL DATA

Sand silo volume13 m3
Blinder 1 Volume6 m3
Blinder 2 Volume / filler volume3 m3
Pre-mixer270 lt gross
Mixer vessel270 lt gross
Pumping tank (with screw pump)320 lt gross
Dry screed production**Up to 6 m3/h
Liquid screed production**Up to 8 m3/h
Water tank500 lt
Enginetruck P.T.O.
Vehicle4 axles truck
Tare (vehicle excluded) *7,5 ton

(*) Tares, dimensions and weights vary according to the set-up.
(**) According to the material and formula used.

MSA 13.6.3 TWIN PTO

OVERMAT MSA 13.6.3 TWIN PTO is the only equipment built to produce both conventional dry screed and liquid screed.
It is made up of three compartments for the storage of raw materials: one compartment for the inert material extracted by conveyor belt and the other
two for binders/filler with extraction through screw conveyors.

This equipment consists of a fixed pre-mixer for the dosing and mixing of all materials.

The subsequent mixer vessel for traditional dry screed and pumping mixer for liquid screed are installed on board the machine and are used alternately, according to the product to pump.

UNION IS STRENGTH

The peculiarity of OVERMAT MSA 13.6.3 TWIN PTO equipment lays in the capacity to produce and pump both conventional dry screed and self levelling liquid
screed.

This innovative OVERMAT equipment is made up of a pre-mixer, in which the raw materials selected in the formula are conveyed and dosed, and two pumping tanks that are easily interchangeable on the jobsite: one mixer vessel is dedicated to the pressure pumping of conventional dry screed and the other one to the pumping of liquid screed with screw pump.

Different types of screed can be produced through the automatic dosing of liquid, gel or powder additives and structural fibres or polystyrene.
The quantity of water in the mixture can be managed through a humidity probe (option) so that the product is homogeneous and certifiable at each working cycle.

CONFIGURATION FOR CONVENTIONAL DRY SCREED

  • 270 lt Pre-mixer on load cells
  • Sliding mixer vessel for conventional dry screed (on load cells)

CONFIGURATION FOR LIQUID SCREED

  • 270 lt Pre-mixer on load cells
  • 320 lt detachable pumping mixer for conventional dry screed (on load cells)

Video

Technical table

EQUIPMENT DETAILS
Compressor 6.100 lt/min @ 10 bar
Upper tarpaulin motorized and radio remote controlled
Dosing kit for powder additive *
Screed hose roller motorized and radio remote controlled
Dosing kit for liquid additives
Kit for pneumatic dosing of loose fibres or polystyrene *
Pipes for pneumatic loading of binder with level sensor *

CONTROLS
GPS tracking and online data transmission *
Thermal printer
Stainless steel operator panel
LCD colour display
Bi-directional radio remote control
(*) Option, not included in the basic set-up All features and specifications described are subject to change without notice. All data are given for information only and are not binding, machine performances vary depending on use.
DIMENSIONS
(*) Maximum chassis height on which it is possible to install MSA 13.6.3 TWIN PTO equipment.

Photo Gallery

Business

Plan the growth of your business,
evolve your business with the help of Overmat!

contacts

Would you like to know more about this product?

Get more information now